-
All prices are in Canadian Dollars. This handy little double-sided plastic tool has a pointed end that can be used to emboss, refine and neaten your metal work. The flat wedge side can be used to erase embossed lines on metal as well as neaten and shape your metal. Handy to help transfer design onto metal from stencils and texture molds. Can be sharpened by rolling over a fine grit sanding paper. -
Out of stock
All prices are in Canadian Dollars. MercArt Metal Embossing Tool set contains 8 double-sided, high quality tools with brass, steel and teflon tips. Tool handles lenghts measure 11 cm. Each Set Contains : 1 stylus/refiner, 3 different texture wheels, brass brush, 3 sizes ball and cup tools sized no 2- 1.98 mm, no.4-3.95 mm and no.6-6.07 mm and 4 teflon tips -
All prices are in Canadian Dollars. MercArt 2 mm Dry Needle Cutting tool for Metal foil Tempered Steel Point -Tip is covered in rubber tubing which should be peeled off before use. -
The Mat Set is a basic requirement for working with metal embossing tools and techniques. Included: one 9 x 12 inch Thin Craft Foam Mat, and one 9 x 12 x 1/8 inch hard, smooth puck board. Puck board is tough, resilient, and will take a beating without cracking or breaking. -
All prices are in Canadian Dollars. Snow Burnishing Block 1" x 1" X 3.75 - fine grit sanding block for removing color from embossed metal. -
Out of stock
All prices are in Canadian Dollars Metal Embossing wheels are used as a quick technique to add raised or engraved texture and decorative borders to metal sheet. Also works well to make decorative designs on polymer clay, metal clay, leather or paper. This texture wheel tool has a comfortable plastic handle measuring 12.5 cm or 4.92 inches, a rubber finger rest and a pointed end that can be used as a line refiner. -
Out of stock
All prices are in Canadian Dollars Metal Embossing wheels are used as a quick technique to add raised or engraved texture and decorative borders to metal sheet. Also works well to make decorative designs on polymer clay, metal clay, leather or paper. This texture wheel tool has a comfortable plastic handle measuring 12.5 cm or 4.92 inches, a rubber finger rest and a pointed end that can be used as a line refiner. -
All prices are in Canadian Dollars. Ball/Spheres and Cup Metal Embossing Tool # 8 -Approximate Size is 7.79 mm This tool is used to emboss the metal to the desired dimension, as well as make perfect domed circles in your Metal Embossing projects. Apart from using the cup part of the tool to instantly refine your spheres it can also be used to make round circle engravings or embossing on your metal. This Ball/Sphere and cup tool head is a No. 8. The number stands for the approximate diameter in mm. Plastic Handle is 11 cm long -
All prices are in Canadian Dollars. Small Rubber Roller or Brayer ( 6 cm width) -useful to smooth or flatten large background areas on metal sheet. Also used to roll over stencils and texture plates to force metal into the pattern. -
All prices are in Canadian Dollars. Small Rubber Roller or Brayer ( 2 cm width) -useful to smooth or flatten large background areas on metal sheet. Also used to roll over stencils and texture plates to force metal into the pattern. Has a comfortable rubber finger rest on 5 inch handle with a pointed plastic end that can be used to refine along the edges of raised metal embossing. Good for smoothing out clay or polymer clay. Tiny size great for travel tool kit. -
All prices are in Canadian Dollars Metal Embossing wheels are used as a quick technique to add raised or engraved texture and decorative borders to metal sheet. Also works well to make decorative designs on polymer clay, metal clay, leather or paper. This texture wheel tool has a comfortable plastic handle measuring 12.5 cm or 4.92 inches, a rubber finger rest and a pointed end that can be used as a line refiner. -
Out of stock
All prices are in Canadian Dollars. Ten Seconds Studio Wheels with decorative designs that add texture to metal and clay: Wavy wheel, horizontal wheel, and wide coarse dots- Unfortunately this product is discontinued - please see other texture wheels sold individually as alternate options including Wavy Texture Wheel Wide Coarse Diamond Texture, Horizontal Line Texture Wheel, -
All prices are in Canadian Dollars This MercArt Texture Wheel is a high quality, durable, dotted texture wheel, that will enhance your metal embossing. Has an 11 cm comfortable grip handle. Creates raised or recessed dots on metal, creates dotted recesses on clay or polymer clay. Excellent for adding design to borders and edges. -
All prices are in Canadian Dollars Blending Stumps. Perfect for blending and smudging colored pencil or any dry medium and to emboss soft metal into high relief. This package contains six blending stumps in assorted sizes. -
Out of stock
All prices are in Canadian Dollars Metal Embossing wheels are used as a quick technique to add raised or engraved texture and decorative borders to metal sheet. Also works well to make decorative designs on polymer clay, metal clay, leather or paper. The plastic handle measures approximately 10 cm or 4 inches. -
All prices are in Canadian Dollars. The four in-line needles will add unique textures to your metal embossing. The comfortable, durable handle is 11 cm (just over 4 inches) long. The needles are 5 mm long and 3 mm wide. Quickly accomplishes fine texture lines on the surface of soft metal. Excellent for creating "basket weave engraving" or multiple equally spaced flowing engraved lines. Can be used on metal and as a create recessed design. -
All prices are in Canadian Dollars Metal Embossing wheels are used as a quick technique to add raised or engraved texture and decorative borders to metal sheet. Also works well to make decorative designs on polymer clay, metal clay, leather or paper. Plastic handle measuring 9.5 cm -
All prices are in Canadian Dollars I use this marker to add a black "patina" to metal embossing in lieu of using an oxidizing solution. -Water-base / Black Pigment Ink -Non Odor - Waterproof -Permanent Marker, writes on all kinds of surfaces : metal, paper, plastic, stone etc. -Round Tip Medium Line -
All prices are in Canadian Dollars Metal Embossing wheels are used as a quick technique to add raised or engraved texture and decorative borders to metal sheet. Also works well to make decorative designs on polymer clay, metal clay, leather or paper. This texture wheel tool has a comfortable plastic handle measuring 12.5 cm or 4.92 inches, a rubber finger rest and a pointed end that can be used as a line refiner. -
All prices are in Canadian Dollars Metal Embossing wheels are used as a quick technique to add raised or engraved texture and decorative borders to metal sheet. Also works well to make decorative designs on polymer clay, metal clay, leather or paper. This texture wheel tool has a comfortable plastic handle measuring 9.5 cm -
All prices are in Canadian Dollars. Ball/Spheres and Cup Metal Embossing Tool # 3 -Size is approximately 3.13 mm This tool is used to emboss the metal to the desired dimension, as well as make perfect domed circles in your Metal Embossing projects. Apart from using the cup part of the tool to instantly refine your spheres it can also be used to make round circle engravings or embossing on your metal. This Ball/Sphere and cup tool head is a No. 3 -the number stands for the approximate diameter in mm. Plastic Handle is 11 cm long -
All prices are in Canadian Dollars. Ball/Spheres and Cup Metal Embossing Tool # 2 -Size is 2.36 mm This tool is used to emboss the metal to the desired dimension, as well as make perfect domed circles in your Metal Embossing projects. Apart from using the cup part of the tool to instantly refine your spheres it can also be used to make round circle engravings or embossing on your metal. This Ball/Sphere and cup tool head is a No. 2 -the number stands for the approximate diameter in mm. Plastic Handle is 11 cm long -
All prices are in Canadian Dollars : The three tools in this set are my favorites and I recommend this set as a bare bones start as you explore your interest in metal embossing. Bare Basics Tool Set :- Teflon tip and fine stylus,
- Plastic Eraser Tool (tip and straight wedge) ,
- Paper Stump
-
All prices are in Canadian DollarsDouble- sided : Pointed tip and small flat Chisel Teflon Tool ( DOUBLE NY POINT: CRAYOLA / CHISEL 1/8) - easy glide over metal surfaces.Versatile Metal Embossing tools used to outline, erase, clean, trace, write and draw lines on metal surfaces. To easily outline or clean the embossed areas. To clean lumps, and flatten the metal.
